Whether you’re a job-shop working with neutral CAD data (STEP, IGES, Parasolid, PDF, etc.) or your company is vertically integrated with design and manufacturing in-house, you need to hold the part in place with an easy to use, configurable fixture or jig. Designing custom fixtures and jigs for each new job can be time consuming, tedious, and, most importantly, costly.
One-off or small production runs vs. high-volume manufacturing and maximizing work area utilization should be considered when designing a work part holding solution. You may want to choose to use a work holding vice with custom faces for soft or hard jaws. A well designed fixture can minimize tooling costs, tool changes, and unnecessary cutting head movements to keep cutting chips instead of cutting air. You may find a "pretty close" solution from a previous job but the CAD rework is too difficult or time consuming so you design a one-off fixture. The solution is to reduce your tooling costs by leveraging reuse.
In this webinar, we'll showcase some fixture-building techniques using CAD tools available in Siemens CAM software packages. Using basic modeling and assembly techniques combined with NX’s powerful Synchronous Modeling toolset, you'll be able to quickly create a tool holding solution that's both associative and reusable.
This webinar will be held on:
Thursday, August 15
8:30am PT / 11:30am ET